patterns | Crown Surface Solutions

View in Room >

Designs

Patterns Specifications

Dimensions

24" x 24" [610mm x 610mm]

24" x 48" [ 610mm x 1220mm]

48" x 108" [1220mm x 2745mm]

Thickness

0.5" [12mm] – Pattern layer only

1" [24mm] – Pattern layer on Backer

Colour

Available in all twenty Zintra 1/2" Sheet colours

NRC Rating

0.45 - 0.95

Weight

24Kg/m2

Thickness

12mm only

Use

Indoor only

Design Element

3mm deep V groove

How to Specify

1. Design 2. Colour 3. Thickness (12mm or 24mm)

Match

Pattern matching with seamless hidden joins

Supplied As

Sheet ready to install

Fabrication

Exacto knife is required

fire rating

Care Instructions

Remove spills immediately using damp, clean cloth.

Dab Zintra with a clean, soft white cloth dampened with a mild solution of liquid detergent and warm water. Repeat using only clean water, then pat dry with a lint free cloth.

Avoid using wax polishes, solvents or concentrated abrasives.

For more difficult stains, dampen a soft white cloth with a solution of household bleach (10% bleach / 90% water). Dab gently. Repeat using only a clean, water dampened cloth to remove bleach concentration then pat dry with a lint free cloth.

Always test in an inconspicuous area first. If care instructions don't deliver the expected results, cease cleaning method immediately and contract CROWN for assistance.

Disinfection - Regular household bleach solution (5.25% sodium hypochlorite) can be used in accordance with Health Canada Cleaning and Disinfection instructions. The solution ratio should be 10% bleach to 90% water. Spray apply the solution as a mist, follow recommended wet contact period and then wipe off the surface moisture.