embossed | Crown Surface Solutions

View in Room >

Embossed

Zintra Embossed adds a luxurious feel to Zintra’s extensive range of acoustic solutions. Ideal for spaces that not only need noise absorption, but also a sumptuous design element only possible through tactile, three-dimensional surfaces.

Zintra’s heather adds warmth to what can often be cold, hard spaces, while consistent patterns progressively match across sheets so there is a seamless design that’s easy to install as either large panels or ceilings tiles.

Specifications

Dimensions

wide 2745mm h x 102mm w x 48mm d, narrow 2745mm h x 42mm w x 48mm d

Material

100% Virgin Polyester

Colour

Available in all 20 Zintra 1/2" Sheet colours plus 4 Timber colours

NRC Rating

0.90

Weight

24Kg/m2

Thickness

12mm

Use

Indoor only

Environment

Zintra is fully recyclable at end of life.

How to Specify

1. Design 2. Colour

Match

Fabrication

Exacto knife is required

fire rating

In accordance with: ASTM-E84 - Class A classification, AS ISO 9705 - 2003 - Group 1 classification
EN-13501 - B-s2-d0 classification. Tested in accordance with CAN/ULC S102-10

Care Instructions

Vacuum to remove dust. Remove spills immediately using a clean damp cloth or with soap and water. Polyester carpet and fabric cleaners can be used (always test an inconspicuous area first). A stain repellent coating is available for additional protection.

Disinfection - Regular household bleach solution (5.25% sodium hypochlorite) can be used in accordance with Health Canada Cleaning and Disinfection instructions. The solution ratio should be 10% bleach to 90% water. Spray apply the solution as a mist, follow recommended wet contact period and then wipe off the surface moisture.